Drill Press Quick Release Clamps
Intro: Drill Press Quick Release Clamps
A quick and convenient way to secure your vice to a drill press table.
STEP 1: Parts
2 bicycle seat post quick releases
4 washers
2 spacers or nuts
STEP 2: Installation
Thread the quick release through the washer, vice and table. Place another washer on the track under the table followed by a few spacers and the fastening nut.
STEP 3: Secure
Adjust vice and push down levers to secure.
8 Comments
GergelyD 7 years ago
Please check your TV screen's orientation before you'd make your next video... ;)
GergelyD 7 years ago
Please check your TV screen's orientation before you'd make your next video... ;)
Dunkiedoo 7 years ago
excellent! LOVE THIS IDEA!
jeana2 7 years ago
Very good idea..
Thank you.
AR1911 7 years ago
Great idea. I just found a box of those quick-release levers in a box on the shelf, and thought..."Hmmm those must be good for SOMEthing". And I put it back on the shelf.
I'll do this - thanks!
pfred2 7 years ago
Now you need to turn your vise into a speed vise.
imakeembetter 7 years ago
Snowberry 7 years ago