Drill Stop

by botronics

5.2K103

Intro: Drill Stop

Sometimes you just want to drill only part way through your work. You can place a piece of tape to mark the depth and help stop the bit from drilling too far.

STEP 1: Wrap the Bit

Measure how deep you want the bit to go and wrap the tape around the bit tightly.

STEP 2: All Done

When your done, remove the tape,clean your mess and put your bit back.

3 Comments

joepetemitch 10 years ago

Nice idea never would have thought if that :)

Winphreak 11 years ago

At first I thought "Well this is simple, why would-" then I remembered I just googled for this. One less headache, works for me!