Duo-Color-LED

Introduction: Duo-Color-LED

Hi,

I need help to improve this project.

I would like to implement a automatic system to turn off/on.

I try to put a renkforce ES-WIRS01 but unfortunately the result is bad.

I think that a more simple system could be used but I don't have any experience about electrical component.

And I need to obtain a maximum informations to define correctly the size of the base.

Thank you.

Step 1:

Step 2:

Rainbow Contest 2016

Participated in the
Rainbow Contest 2016

Be the First to Share

    Recommendations

    • Holiday Decorations Speed Challenge

      Holiday Decorations Speed Challenge
    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest

    4 Discussions

    0
    DIY Hacks and How Tos

    Cool light plate. Could you share a little more about how you made it.

    0
    Omni Moulage
    Omni Moulage

    Reply 4 years ago

    Hi, I have tried to explain the different steps on the PDF file.

    To answer you more better, could ask me exactly what I need to precise ?

    Thx

    0
    DIY Hacks and How Tos
    DIY Hacks and How Tos

    Reply 4 years ago

    I was wondering what you used to make the design on the plates.

    0
    Omni Moulage
    Omni Moulage

    Reply 4 years ago

    After finding the logo on internet, I changed it into DXF in Inkscape.
    Then I used Rhino 3D to improve the sketch (type of polyligne, closure, etc) Because at the beginning I wanted to engrave the plate on my CN. (Kosy A5)
    But the result was not perfect by milling also I used the service of a supplier specialized in Laser Engraving. (http://www.gravure-laser-concept.com/)