Introduction: Easy Dog Coat Tutorial

A FiberArtsy Tutorial

Seems the only exercise I have time for these days is walking. Well,
like many of you, I don’t like to walk alone so I take our beagle, Maggie, with me. Winter’s here and as luck would have it, I couldn’t find Maggie’s coat. The sewing machine was already out so, of course, here goes another project! (My husband’s favorite saying…”You can make that!”)

Step 1: Supplies:

Supplies needed:
-Large piece of non-raveling fabric such as felt. This will eliminate the need to hem the edges. I had previously nuno felted a large piece of fabric with silk chiffon sandwiched between two layers of alpaca fiber batting. I dyed this in a marbled red/blue.

-Sew on Hook & Loop Tape such as Velcro

-Sewing machine or needle and thread

Step 2: Measuring:

This is the basic shape for most dog coats. The bottom part wraps
around the torso and is attached with hook & loop tape at the belly. The front pieces wrap around the neck to keep the whole thing in place. I measured around Maggie’s belly, neck and the length of her body to get the general size.

Step 3: Sewing:

All I did was sew the pieces of hook & loop tape to both sides of the belly part and both sides of the neck part. I couldn't find the wider tape so instead I used two pieces of the 1" tape for a snug fit.

We took the coat for a test drive and it works like a charm! And the
beauty of alpaca fiber is the warmth even though the fabric itself is very thin and lightweight. Now we just need to see how durable it is.

You may also like:

Make Your Own Boot Cuffs

How to Make a Headband, Ear Warmer