Easy IPod Touch Charger Dock
Intro: Easy IPod Touch Charger Dock
Materials-
7 2x2 thick blocks
1 2x4 thick block
2 1x6 thick blocks
1 1x12 thin block
2 2x4 rounded thick block
2 2x6 thin blocks
2 2x4 thick slanted blocks
1 2x6 thick block
Supplies- IPod
Charger
Optional- 2 1x1 dot piece
STEP 1: Base
First you want to get the 8x8 thin piece and snap on the 2 2x2 pieces in the front like so.
STEP 2: Front
Add the 2x6 piece on top of the two 2x2 pieces with the rounded 2x8 piece.
STEP 3: Sides
Snap on the four 2x2 blocks on the edge like so add the slanted ones on top of them
STEP 4: Back
Add the 2x6 block at the back of the contraption, then add the two 2x4 blocks on top. Last put the rounded piece on top.
STEP 5: Balance
Get the rest of the pieces except the 1x12 piece and place them on the front like in the pictures for balance.
STEP 6: Inserting the Charger
Turn the contraption on its side like in the pictures insert the charger into the little slot like shown in the pictures.
STEP 7: Finishing Up
Last of all add your iPod on the dock, it's ready to charge, play music or just sit there
2 Comments
tagglisson99 11 years ago
Penolopy Bulnick 11 years ago