Introduction: Emotion Thought Bubbles
I came to this idea after seeing the thought bubbles instructable.
Step 1: Essentials
Step 2: Set Up
In microsoft word go up the top to
In Auto shapes find a Smiley face in Basic shapes.
Make the face as big as you can on one page.
Step 3: Circles
IN auto shapes again get 2 circles with one slightly bigger than the other.
Step 4: Cut It Out
cut out the 3 shapes.
Step 5: Put It Together
Tape wire onto the back of the 3 circles as shown in the picture.
Then bend the wire as also shown in the picture.
Adjust it to fit your head.
The little bulb is where the wire is wraped around to bind it together.
Step 6: All Done!
this is a picture I took of myself in a mirror
Be the First to Share
7 years ago
You should make it a dry erase board
15 years ago on Introduction
So how is this unique from the first Instructable?
BTW: I do commend you for at least giving credit to the original Instructable, but you absolutely should have included a link!
Reply 15 years ago on Introduction
This is a wearable one... the other one is held on a rod by another person.