Extreamly Fast Nerf Loading Tips (Recon)

by aliensarecoming

9.5K310

Intro: Extreamly Fast Nerf Loading Tips (Recon)

In this mod i will be showing you how to do two fast loading mods.

STEP 1: Chuck It in the Front!

1. take a nerf dart
2. reload the gun backwards and forwards
3. put the dart in the front and push.
4. fire!

STEP 2: Chuck It in the Bottom!

1.take one streamline dart
2. load it into the mag
3. pull the slide back and load the clip
4. push the slide forward as in the picture
5. pull the slide back
6. remove the clip
7. push forward
8. Fire!

10 Comments

tacozcank1ll 12 years ago

i dont think anybody would do the second one

NerfModder117 8 years ago

Yeah. You can just put a dart in the blaster through the clip thing.

Famoosh 13 years ago

Or, you can throw the dart in the bottom without a clip. But if you had a clip, why not use it instead? Lots faster than from the front. Or the bottom.

peyton14 11 years ago

when done eith clip,whip it at oppent! how bout that!

mettaurlover 13 years ago

This is just common sense. The only situation this would be necessary in is if you were stupid enough to only bring one clip, in which case you wouldn't have the extra darts to do this in the first place.

Planemaster101 13 years ago

Famoosh pointed out the hole in the bottom thingamagigger, didn't you ever wonder what that was for? The Nerf people probably put that there in hopes someone would figure this out. Think outside the common sense, buddy.

billybenj 13 years ago

the second way would accually take longer, the first one prolly would too....

aliensarecoming 13 years ago

What do you mean about 'prolly'? The First way is less accurate but faster, but the second is way more accurate.

billybenj 13 years ago

it would be faster just to put them all in a clip, or make a breech, and that wouldnt effect how accurate it is.

jason the red 13 years ago

or just make a few 12 dart clips and reload half as often