FMG-9 Mods
Intro: FMG-9 Mods
As some of you may know, I made some mods to TeacherOfTheWays' foldable gun, the FMG-9. I really like the gun and I decided it could use some improvement. Hope you enjoy my instructable.
STEP 1: Hopper
The hopper that I attached onto the gun. Is mostly the same as the one from oodalumps' 7-shot pistol. Here are some different views.
Pic 1: First Side
Pic 2: Second Side
Pic 3: top view.
Pic 4: Hopper on Gun
Pic 1: First Side
Pic 2: Second Side
Pic 3: top view.
Pic 4: Hopper on Gun
STEP 2: Removable Handle
Since I added the hopper I thought it would be easier to reload if I made the handle removable so here it is.
Pic 1: The handle
Pic 2: Different view
Pic 3: Move blue rod to here
Pic 4+5: Add three ball sockets to other blue rod and connect handle
Pic 1: The handle
Pic 2: Different view
Pic 3: Move blue rod to here
Pic 4+5: Add three ball sockets to other blue rod and connect handle
STEP 3: Improved Firing Mechanism
I soon found out after making the gun that if you put more than one rubber band on the gun it would not fire because the firing pin would catch on the green connector. To solve this problem I cut a white rod to the size of a green rod and replaced the green rod with that. Sorry but I only have one picture.
24 Comments
beameron 15 years ago
mettaurlover 14 years ago
KnexFreek 14 years ago
LvNo1000 10 years ago
mettaurlover 14 years ago
KnexFreek 14 years ago
KnexFreek 14 years ago
beameron 15 years ago
mettaurlover 15 years ago
Jeroen1022NL 14 years ago
instructions of FMG-9
btw TeatcherOfTheWays have stolen that gun from Knexinnovation.net
mettaurlover 14 years ago
mettaurlover 14 years ago
dnsd99 14 years ago
mettaurlover 14 years ago
DrWeird117 15 years ago
ojochris 16 years ago
jawlecks 16 years ago
DrWeird117 15 years ago
ojochris 15 years ago
DrWeird117 15 years ago