Introduction: Faded LEDs

About: help me

You will need for this project

  • 1x Arduino Uno
  • 1x Potentiometer
  • 5x 220ohm Resistors
  • x5 LEDs
  • Handful of jumper wires

Step 1: Get Your Components Like So

Step 2: Potentiometer

First, go ahead and connect your potentiometer to the ground and power row on the bread board, and the digital cable to analog 0 pin

Step 3: LEDs

Line your LEDS up in a straight row like so

Step 4: Ground LEDs

Ground the LEDs to the row below to the breadboard, next to each LED, place your resistors

Step 5: Connect the LEDs to Their Respective Pins

Step 6: Ground and Power the Breadboard

Step 7: Video Example

Step 8: Code