Fence Adjustments

by AutodeskTechnologyCenterSF

83420

Intro: Fence Adjustments

The fence has two halves that are adjustable for width. Adjust the gap between the bit and each section of fence to about 1/2".

STEP 1: Using the Fence

  1. Loosen the black lock knobs.
  2. Slide the fence sides into position.
  3. Snug the lock knobs.

STEP 2:

Adjusting how far the bit sticks out past the fence will determine how deep into the workpiece the bit cuts.

Taking several small cuts ensures safety and accuracy.

  • Never take greater than 1/8" depth of cut.

Never place the workpiece between the bit and fence.

This can cause the bit to grab the work and throw it across the shop.