Finger Snowboard Instructable

Intro: Finger Snowboard Instructable

Finally the instructable for the finger snowboard shown in my slideshow (improved!).

STEP 1: The Parts You Will Need...

The picture shows all you need apart from another couple of sheets and some simple office tape!

STEP 2: Design...

I guess everybody likes a different design, but the basic things are:

-You have to make it large enough so that the ends of the bindings do not go off the edges too much.
-Long enough to accustom both of the bindings without the being squashed together; but not too long.
-Nice round edges.

Most of it is common sense really...

STEP 3: Making the Deck (part 1)

-You now have your template. Cut this out.
-Now take a new sheet of paper and fold so you get some good thick stuff to cut from.
-Check if it can accustom the width of your board.
-Trace around the template on your thick stuff.

Perfect...

STEP 4: Making the Deck (part 2)

-Before cutting out everything staple the whole lot as shown. You will want to staples on each side to bend when making the tail and the nose.
-When you have this cut out!

STEP 5: Making the Deck (part 3)

Now the final part...

-Circle lots of tape round it to make a nice, hard structure.
-Bend the nose and the tail.
-Bend those staples to to make to board keep it's shape.

There... You have the deck!

STEP 6: The Bindings

You will have to custom make the bindings for each finger.

-First you cut a square of paper approximately what I have shown you.
-Roll it round your finger etc... To make it look like what is on the photos.
-You then ensure it's sturdiness using tape and make it look better with strips of paper. It's common sense really...
-Do not make the bindings to large, long, high etc...

Make two of these...

STEP 7: Stick It All Together! (you Are Nearly Finished!)

-This is common sense...

STEP 8: Well Done!

You have finished the Finger Snowboard!

Comments

[Farid007]

You can use a pc with paint on it so you customize it,print it ,cut it ,tape it &voila awessome

[shawdow7341]

this is so cool all that tech deck stuff and that crap is so hard for me to control but this it stays on your fingers  


SOOOOO COOOOOOLLLLL

[thawkman]

Dude, you should check out my instructable, its basicly the same thing but the snowboard is way sturdier and the bindings have straps look :

[da animal freak]

thanks for the great post. me and my brother made 5 of them and they're so awesome but is there any site which will teach you how to do tricks?

[wham39837]

i made a man sized one, and sold it for £60.00 (cool dude)

[jacob cody]

i made one a while back and my friends loved it so i made them each one for $5 each. they really liked them and i got money so were all happy...lol

[callumlewin]

 this is my snowboard and quarter pipe hope you like it good instuctable

[jackdb1998]

thats basicly just cheating! when you jump on a tech deck its more fun on this it just sticks to ur fingers!

[samlehman]

great this is awesome i love it it's nearly better then my real snowboard

[daninja]

whats bindings?

[julesv]

Bindongs are the part that connect your feet to the board.

[Godzzz]

lol bindongs

[Joncalebbrown]

YO u rely need decorations.paint it or color it.i don't like it white

[Electricellis]

great thanks i live in england so you can only buy the cheap shity ones but this is great i will make some tomorrow and i will send some pictures i might make some ramps and stuff

[sharlston]

no u cant i live in england look in the argos catalogue

[experiencefb12]

dude i made one it's awesome. the only thing i couldn't do is make the toes for the bindings. haha heres a pic.

[npallstar97]

can you find these in stores?

[npallstar97]

this is an awesome guide

[psplayer23]

5/5 its really hard to find these in store and this was perfect on how to make one

[brock da diy man]

looks fun i want to try it 5/5 stars =)