Introduction: Fixperts - a Smart Paper Dispenser

Hi!

We are Hadar and Bat-el, and we made a paper dispenser for special aid children and staff members that helps the children take paper independently.

* The project was part of our industrial design studies at "HIT- Holon Institute of Technology in cooperation with "Oz" elementary school in Holon.

Step 1: Video

Step 2: Print Instructians and Make Your Own =)

Attachments

Step 3: Stl \ Solidwork Files

Attachments

Step 4: Table of Contents

Step 5: Paper Dispenser - All the Parts

Step 6: Paper Dispenser - 2 Main Parts

Step 7: Adapted Original Dispenser - BOM

Step 8: Maine Pole - BOM

Step 9: Cutting the Original Dispenser

Step 10: Cutting the Original Dispenser

Step 11: Cutting the Original Dispenser

Step 12: Cutting the Original Dispenser

Step 13: Cutting the Original Dispenser

Step 14: Cutting the Original Dispenser

Step 15: Making the Main Pole

Step 16: Making the Main Pole

Step 17: 3D Printing

Step 18: Attaching the 3D Printed Parts to the Main Pole

Step 19: Attaching the 3D Printed Parts to the Main Pole

Step 20: Attaching the 3D Printed Parts to the Original Dispenser

Step 21: Combining the 2 Main Parts