Fly the TriFin!
Intro: Fly the TriFin!
Here is a nice simple plane for you to fly!
First, print off the template here at
http://www.theonlinepaperairplanemuseum.com/OPAMTriFin/OPAMTriFinPlans.doc
or look at the whole design here at
http://www.theonlinepaperairplanemuseum.com/OPAMTriFin/TriFin
First, print off the template here at
http://www.theonlinepaperairplanemuseum.com/OPAMTriFin/OPAMTriFinPlans.doc
or look at the whole design here at
http://www.theonlinepaperairplanemuseum.com/OPAMTriFin/TriFin
STEP 1: Step 1
Take the template, get some clear tape and a pair of scissors and a paperclip.
STEP 2: Step 2
Start with the paper as shown.
STEP 3: Step 3
Fold back along line "A".
STEP 4: Step 4
Fold back along line "B".
STEP 5: Step 5
Fold back along line "C".
STEP 6: Step 6
Fold back along line "D".
STEP 7: Step 7
Fold in half along line "E".
STEP 8: Step 8
Cut out along the curved line "F" and recycle both scraps of paper.
STEP 9: Step 9
Fold the top wing and tail down along line "G" to the left.
STEP 10: Step 10
Fold up the tail along line "I".
STEP 11: Step 11
Flip over and fold the other wing and tail to the right along line "G".
STEP 12: Step 12
Fold up the other tail along line "I".
STEP 13: Step 13
Pop up the middle tail along sections "H".
STEP 14: Step 14
Put a paper clip on the nose.
STEP 15: Step 15
Place a piece of clear tape on the paper clip to hold it in place.
STEP 16: Step 16
Straighten out the wings and FLY!
If you want more FREE paper airplane designs, check out
The Online Paper Airplane Museum at
http://www.theonlinepaperairplanemuseum.com
for over 800 FREE paper airplane designs.
Grab some paper and have some fun!
If you want more FREE paper airplane designs, check out
The Online Paper Airplane Museum at
http://www.theonlinepaperairplanemuseum.com
for over 800 FREE paper airplane designs.
Grab some paper and have some fun!
5 Comments
Allowance10 15 years ago
deanmackey 15 years ago
http://www.theonlinepaperairplanemuseum.com/RobbieTheRobot.html
Uncle Dean :)
Flumpkins 15 years ago
ac1D 16 years ago
R/C plane fan! >
Add a lipo battery in the middle crack, add a tiny zipzap(or servo with 360* modification) motor on each FRONT wing, and your receiver almost in the back. it do a very well flight! and its quick !
ac1D 16 years ago