Introduction: Garden Tools Hanger.
Workshop Organization its key in order to find each Tool where you can find it easily. I was wondering a way that customize my own Tool hanger.I´m going to share with you this simple Tool Hanger.
Step 1: Stuff.
Metal stripes.
Pointed pliers.
Welding machine.
Small Board.
Paint.
Step 2: Twist and Shout.
Ok the twists are made with Metal sheets from scrap. each strip had 5mm x 250 mms. At first you hav to make a small loop. Then try to do a spiral. For this frame I Made 14 loops.Find the center of the upper side and start to weld al the loops around the frame.In between each loop I welded the hooks.And why Shout...? Well dont let the pliers catch your fingers when making the loops.
Step 3: The Board.
First I just put a small board with the word <Garden > In the middle But Finnally I decided to put a sticker of my favorite Band " The Rolling Stones".And the results : Astonishing.
Step 4: Hang Your Tools.
Now is ready to Hang your garden tools.
Participated in the
Spring Cleaning Challenge
Participated in the
Tools Contest