Giant Lollipop Sign
Intro: Giant Lollipop Sign
Check out my first attempt at making a 3D sign and my first Instructables!
It's a 2ft diameter x 4ft high x 4in thick Lollipop!!!!
It's made out of HDU (High Density Urethane) Design Board.
I designed it with EnRoute software...then carved the two halves on my home made CNC Router...then the two halves were glued together with an aluminium framework sandwiched in-between for support and to act as "the stick"...then I cleaned it up by hand and did some final carving by hand...then primed it...brush painted it....airbrush painted in some shadows...then applied 3 coats of sparkling clear coat.
Hope you like it!
It's a 2ft diameter x 4ft high x 4in thick Lollipop!!!!
It's made out of HDU (High Density Urethane) Design Board.
I designed it with EnRoute software...then carved the two halves on my home made CNC Router...then the two halves were glued together with an aluminium framework sandwiched in-between for support and to act as "the stick"...then I cleaned it up by hand and did some final carving by hand...then primed it...brush painted it....airbrush painted in some shadows...then applied 3 coats of sparkling clear coat.
Hope you like it!
10 Comments
craftyv 13 years ago
rkguy 13 years ago
craftyv 13 years ago
craftyv 13 years ago
hootchiemama 13 years ago
scoochmaroo 13 years ago
cj8675 10 years ago
rkguy 10 years ago
What's your shop? Do you have pics online of the wrapped candy sign you made?
cj8675 10 years ago
http://www.graphicasignstudios.com/
rkguy 13 years ago