Glitter Filled Party Blowers

Introduction: Glitter Filled Party Blowers

This is everything I start with when making a glitter filled party horn.

Step 1:

Blow air through it so its open and lightly squeeze the sides

Step 2:

You
can cut the tip here. Its just a bit of tape and you can put in the glitter this way. If you do it this way there will be less leakage remember to re-tape it. Of you can pour it through the back end.

Step 3:

It rolls up almost as tight. If you don't know to look for it you will never know they are filled with glitter.

Step 4:

They package up just fine. You would never know they were messed with.

You can also buy it off of me at www.theirjustdeserts.com we also have so many other pranks for sales

Step 5:

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Make It Modular: Student Design Challenge

      Make It Modular: Student Design Challenge
    • Tinkercad to Fusion 360 Challenge

      Tinkercad to Fusion 360 Challenge

    2 Comments