H.S.S.R. V2 (Heavy Support Splodie Rifle).
Intro: H.S.S.R. V2 (Heavy Support Splodie Rifle).
(I'am from holland so my english isn't always that good :P)
Welcome to my 1st instructable. In this instructable you'll see how the HSSR is made.
The HSSR shoots splodies, with a rang of 30-50 ft (depends rubberbands). The gun is bolt-action, so it has to be cocked every time you want to fire. It doesnt has a hopper, so you also have to load it every time you want to fire. The gun fires a lot of diffirent splodies but I prefer the red lenghth splodies.
I hope this instructable is clear enough to build it, if you have any comment or tip; Plz tell me.
good luck,
Infinnion ;)
EXTRA: you can add some grey connectors to the side of the gun to hold splodies.
WARNING: I'm not responsible for any damage to urself, your house, your cat. So plz dont shoot at animals or people (or expensive windows:P:P:P).
Welcome to my 1st instructable. In this instructable you'll see how the HSSR is made.
The HSSR shoots splodies, with a rang of 30-50 ft (depends rubberbands). The gun is bolt-action, so it has to be cocked every time you want to fire. It doesnt has a hopper, so you also have to load it every time you want to fire. The gun fires a lot of diffirent splodies but I prefer the red lenghth splodies.
I hope this instructable is clear enough to build it, if you have any comment or tip; Plz tell me.
good luck,
Infinnion ;)
EXTRA: you can add some grey connectors to the side of the gun to hold splodies.
WARNING: I'm not responsible for any damage to urself, your house, your cat. So plz dont shoot at animals or people (or expensive windows:P:P:P).
STEP 1: Front Piece (barrel and Most of the Mechanism).
This instructable excits out of 7 steps:
- front piece
- middel piece
- stock
- top piece
- complete assembley and the rubber bands
- "lock and load" shooting the damn thing
Front piece:
just follow instructions on photos.
- front piece
- middel piece
- stock
- top piece
- complete assembley and the rubber bands
- "lock and load" shooting the damn thing
Front piece:
just follow instructions on photos.
STEP 2: Middle Piece
making the middle piece, includes grip and trigger.
Just follow instructions on the photos
Just follow instructions on the photos
STEP 3: Stock Piece
this is an easy piece,
just follow the instructions on the photos again ><
just follow the instructions on the photos again ><
STEP 4: Top Piece
very short step
STEP 5: Complete Assembly and Rubber Bands
putting it al together
STEP 6: Firing It
Ok this is how it works:
You make a splodie, pull back the bolt, lock the bolt, put in a splodie ( make sure it is between the to connector things), and fire it.
Finaly... I made my 1st instructable, It took some time (bout 2,5 hours...) And it was pretty boring to do, but worth it.
have fun,
You make a splodie, pull back the bolt, lock the bolt, put in a splodie ( make sure it is between the to connector things), and fire it.
Finaly... I made my 1st instructable, It took some time (bout 2,5 hours...) And it was pretty boring to do, but worth it.
have fun,
142 Comments
hazza the gun 12 years ago
foxtrotfire 13 years ago
TigerNod 14 years ago
CoasterKid98 14 years ago
TigerNod 14 years ago
CoasterKid98 14 years ago
smidge147 16 years ago
Infinnion 16 years ago
lord voldamort 14 years ago
knexjay 14 years ago
lord voldamort 14 years ago
knexjay 14 years ago
DJ Radio 14 years ago
xadevox 14 years ago
054629 14 years ago
Knex Rules 16 years ago
Infinnion 16 years ago
agent harmsy 16 years ago
Mepain 16 years ago
The Jamalam 15 years ago