Halloween Kid Finder

Introduction: Halloween Kid Finder

Have you ever been out Trick-or-Treating and notice that it is very difficult to keep track of your child when they are all with their friends and they are running from house to house all at different rates and it is like mass chaos!?

Well I have, that is why I have developed a way of keeping track of your child or children. This is a fun project that is done with the Mediatek LinkItOne to solve this problem. This could also be done with a bluetooth module and a microcontroller, intel edison , raspberry pi , arduino, etc.

This will place a super bright set of LED's on your child's costume that when you press a button on your smart phone via Bluetooth the light will send a bright light up and you will be able to see your child.

Also, if you have multiple children, like me, you may want to change the color of the LED's for each child.

Have fun and Happy Halloween!!!!

Step 1: Child Locator

Happy Halloween to ALL!!!!! It is that time of the year again. I am going to be sharing with you another LinkItOne project that will help you find your kid while you are out going trick-or-treat!!

LinkItOne Setup https://www.youtube.com/watch?v=7EBeC1ZfH-o

Support the channel tip with bitcoins Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh

Follow me on YouTube: http://www.youtube.com/misperry

Follow me on Twitter http://www.twitter.com/misperryee

T-Shirts http://www.zazzle.com/misperry

Be the First to Share


    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge
    • Chocolate Challenge

      Chocolate Challenge
    • Science Fair Challenge

      Science Fair Challenge