Hammerhead Glider II

Introduction: Hammerhead Glider II

About: I instrutable things.

How to make Hammerhead Glider II:


 Let me introduce the Hammerhead Glider II. The improvements in the 2nd edition is more steady flight, straighter flight,  faster gliding [a bit] and further flight [maybe].


 Hammerhead Glider - A Hammerhead that is a glider, possibly the first glider even in the Hammerhead range, possibly.
Hammerhead Glider II - A better handling glider than the original one.


“This instructable is an entry in Paper Airplane Contest 6 (https://www.instructables.com/community/Paper-Airplane-Contest-6/)”

Now go to the new page.

Step 1: Materials Required

You need:



Ruler to make it accurate.  

Step 2: 1

Get a paper and fold it.

Step 3: 2

Open it up and you can see the crease is made.

Step 4: 3

Fold the side of the crease.

Step 5: 4

Open it up and it should look like the picture above.

Step 6: 5

Fold it like the picture.

Step 7: 6

Turn over.

Step 8: 7

Fold it like the picture.

Step 9: 8

Turn over.

Step 10: 9

Fold it like the picture. Notice: It folds between the end of the straight edge. 

Step 11: 10

Turn over and fold it like the picture.

Step 12: 11

Turn over.

Step 13: 12

Open and push the tip down.

Step 14: 13

Fold it in half.

Step 15: 14

Fold it into a paper airplane but like the picture.

Step 16: 15

Now it should look like this.

Step 17: 16

Fold the tip like the picture.

Step 18: 17

Fold the side so the end side point near the side crease but not on the crease and do the other side the same and open it up 90 degree and it should look like the picture.

Step 19: Finished!

It should look like this. Go to the next stepto learn how to fly.

Step 20: How to Fly the Aircraft.

To fly it:

Gliding - Throw it gently.
Flying - Just throw it.
Fast  - Just throw it hardly.

Step 21: Enjoy!!!!

Be the First to Share


    • Pets Challenge

      Pets Challenge
    • Leather Challenge

      Leather Challenge
    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge



    4 years ago

    the instructions aren't very clear, so I wasn't able to finish it:-(


    10 years ago on Step 20

    Should blunt the front of the plane. it will fly better. the pointy front is also weak and have to make it straight back if it crashes. overall, it flew great.


    Reply 10 years ago on Step 20

    well the front is just a areodynamic but anyway in the future ill think about it.