Hobby RC Car Trailer!!!

Introduction: Hobby RC Car Trailer!!!

How to make a cool looking professional trailer for your hobby rc car!!!

Step 1: The Bed

Screw together 2 pieces of scrap metal. (Optional: Paint it.)

Step 2: The Wheels

Screw wheels from toy car on the middle.

Step 3: The Reciver

I used more scrap metal cut in an A shape for the reciver. Then I put a hole in the top.

Step 4: The Hitch

I cut scrap metal in this shape and put a screw through the middle.

Step 5: The Coupler

I put a washer on the screw than a screw on washer.

Step 6: Attaching the Hitch

I put it in my bumper then bent it over like this.

Step 7: Spare Tire and Level

I used a screw as the level and another toy wheel for the spare.

Step 8: Attaching the Trailer

The washer goes below the reciver and the screw on washer goes above the reciver.

Be the First to Share


    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge
    • Stone Concrete Cement Contest

      Stone Concrete Cement Contest
    • Electronics Contest

      Electronics Contest



    Reply 7 years ago on Introduction

    Thanks, it's my first instructable. :-)