Introduction: How to Make Flubber With Three Ingredients!

By
Make this flubber at home only using borax, water, and glue!

Step 1: Extra Materials

Extra materials include:
-2 bowls
-measuring cups
-spoons

Step 2: The First Bowl

In the first bowl, pour 3/4 cup of water and two tablespoons of borax. Mix until no chunks remain.

Step 3: The Second Bowl

Mix one cup of glue with 3/4 cup of water in the second bowl.

Step 4: Stir

Mix the two bowls together and stir. Make sure to put the glue mixture in first then pour little bits of the borax mixture. It will start to become like flubber, but keep stiring

Step 5: Take Out the Flubber

Once all the borax mixture is poured, take out the flubber. It will be very wet, but as you knead it in your hands, it will begin to dry off. Just make sure to wash your hands after.

Step 6: Done!

Well I hope you liked it and nothing went wrong if you did make it! I am hoping this will get into the finals, so be sure to favourite and like!