Introduction: How to Make the Destroyer Dart Paper Airplane

About: I am someone who mass produces paper airplanes and am always developing new designs. I post regular updates on Twitter. Follow me there to keep up with the latest developments!

So named for its Wild Weasel role, the Destroyer Dart is also a good interceptor.

TAA USAF Designation: F105-1 

Step 1: Materials

1 piece of 8.5 by 11 inch Paper

Step 2: X Fold to Start

Fold the paper from one corner to the other side and repeat on the same side.

Step 3: Cover Folds

Pull the top down over itself and fold it as shown in the pictures.

Step 4: Preparation for the Security Fold

Pull the corner into the center as pictured. Repeat on the other side, then fold the plane in half.

Step 5: Security Fold

Along the airfoil line, fold the two flaps underneath the line.

Step 6: Fold the Wings

Fold the airplane in half along it's center. Then fold the wing down along the security fold. Repeat on the other side of the aircraft.

Step 7: Tape Your Aircraft

Tape along the bottom of the security fold, the back of the security fold and the rear of the airplane.

Step 8: Flight

Your Destroyer Dart is now ready for flight. Enjoy!