How to Make a Soda Can Beer Sleeve

by hackcollege

60K2615

Intro: How to Make a Soda Can Beer Sleeve

Get away with some drinking in public with a soda can beer sleeve. Chris from HackCollege shows how to make one in 5 minutes or less. Tailgates, here we come.

15 Comments

SIRJAMES09 12 years ago

why not just make a coozy?
Take a mouse pad, attache a coke, pepsi, root beer, etc...label, sew it so it's snug around the can,bottle, etc, & not only will it "hide" the beer, but it'll keep it cold too!!

beehard44 12 years ago

it would be better if you score and cut the can using a blade in a book, giving you better accuracy and a cleaner cut
and sand your edges

philslizzy 14 years ago

cans in the uk: pop (soda) cans are usually 330ml and beer cans are 440 or 500 ml. it would be easy to put  pure vodka in a 330ml can  and have a second containing coke

philslizzy 14 years ago

thirty twoth is fine. a pity that the cans in the uk are different !

dinglballs 14 years ago

HAHAAHA "thirty tooth of an inch"

dodo91 15 years ago

it would be "thirty seconth of an inch" .great idea

darkinertia 15 years ago

" probably a thirty tooth of an inch" haha great vid

bilham 15 years ago

If you hold the can a little loose wont the inside can just slip out? Maybe you can cut the bottom of the coke can and slit the side-- hold the coke can upside down with the beercan in it. Since the coca cola lettering is sideways, it might look normal.

theroofpro 15 years ago

lol @ "thirty two-th of an inch"

dmesser 15 years ago

How to disguise your beer as a soda can in 15 seconds or less: Pour the beer into the soda can.

Rockerx 15 years ago

it's a bit like kipkay's...

theRIAA 15 years ago

better way? use razor blade in book technique to take off bottom, can opener to take off top, sand top edge, and cut down the side.