How to Melt a Hole in a Coke Can
Intro: How to Melt a Hole in a Coke Can
I was bored one day and I had some strobe fireworks and n empty can lying around. I put them together and came up with this!--WARNING--Fire can burn you! Also the can is hot for about 30 seconds after the fire goes away
STEP 1: Materials
You will need:
empty can
Flashing signal fireworks
lighter
________________________________
Optional
M85 fircrackers
empty can
Flashing signal fireworks
lighter
________________________________
Optional
M85 fircrackers
STEP 2: Setup
Hold the strobe at the bottom(don't worry it has a long fuse)
Light it
Let go(make sure it goes in the hole)
run away and watch
Light it
Let go(make sure it goes in the hole)
run away and watch
STEP 3: Optional
Now's the part where the firecrackers are used.Just stick it in after the can cools down, light it, and run away.
15 Comments
dla888 14 years ago
theyoweusaliving 14 years ago
PizzaPlanet 14 years ago
notyouraveragejoe 15 years ago
explosivemaker 15 years ago
Father Christmas 15 years ago
Radar252 15 years ago
mg0930mg 15 years ago
That Hurt This Time 15 years ago
401446 15 years ago
jj32x 15 years ago
Supreme_Angler 16 years ago
Domindude3 16 years ago
halomaster007 16 years ago
Hawaii00000 16 years ago