How to Program a Brushless Rc Car

by pyro_chemist111

9.4K201

Intro: How to Program a Brushless Rc Car

STEP 1: What You Will Need:

- brushless rc car
- battery for the car
- program card ( make sure the card is capable of programming your Electronic Speed Control or esc ).
- servo extension cable ( male to male )

STEP 2:

Plug in the servo extension cable on the right input where it says +-||. Make sure the gold pins are faced up towards you when u plug it in.

STEP 3:

Unplug the fan cord on the side of the esc

STEP 4:

Plug the other end of the extension cable into the esc. Make sure the gold marks face the esc.

STEP 5:

Plug in your battery while the switch is off. When it is plugged in switch it on and give it a second.

STEP 6:

Have fun programming your car!!

Comments