How To: Slither Jet 271

Hello and welcome to one of my favorite but small creations THE SLITHER JET 271 (i just made a name up.)

Step 1: Unit 1 of 3

Each part is a unit. You will connect the units to make the ship,these are the pieces you need for unit 1

Step 2: Unit 1 of 3 Part 1

Put the two wing pieces together and attach them with the 6x2 piece

Step 3: Unit 1 of 3 Part 2

Put the blue piece near the bottom of the ship so it covers 2 of the pieces on the 6x2

Step 4: Unit 2 of 3

These are the pieces needed for unit 2

Step 5: Unit 2 of 3 Part 1

Put the 2x12 piece on the 4x8 piece.

Step 6: Unit 2 of 3 Part 2

Put the 2 wings on the sides of unit 2

Step 7: Unit 3 of 3

Attach unit 1 to the top of unit 2

Step 8: Unit 3 of 3 Part 1

Here is 1 more piece for unit 3

Step 9: Unit 3 of 3 Part 2

Attach the 6 x2 on the bottom of units 1 and 2 as shown.

Step 10: Unit 3 of 3 Part 3

Here are the pieces that complete unit 3.

Step 11: Unit 3 of 3 Part 4

Attach the 2x6 piece to the two bodies of the jet so they stay together.

Step 12: Unit 3 of 3 Part 5

Attach the orange pieces in the middle sides of the bodies,and attach the front wing to the front. (duh.)

Step 13: Unit 3 of 3 Part 6

Attach the beige piece to the back and the yellow in the front

Step 14: Unit 3 of 3 Part 7

Attach unit 3 to unit 1/2.

Step 15: Unit 3 of 3 Part 8

Here are the pieces for the last part of unit 3.

Step 16: Unit 3 of 3 Part 9

Put the green piece right behind the yellow piece. To do that move the orange pieces back once

Step 17: Unit 3 of 3 Part 10

Attach a 2 sided piece to the back of the ship.

Step 18: Unit 3 of 3 Part 11

Put the light blue and long license plate together.

Step 19: Unit 3 of 3 Part 12

Attach the license plat and blue piece to the back

Step 20: Unit 3 of 3 Part 13

Put the 2 blue pieces right behind the license plate

Step 21: Unit 3 of 3 Part 14

Add a brown piece that sticks upward behind the two blue blocks.

Step 22: YOU'RE FINISHED!

You are now finished with you ship. Have fun building!