Introduction: How to Field Strip an Airsoft Gun
This Insructable shows how to field strip a gun(pistol).
Step 1: Safety First
The first step is to make sure your gun is not loaded and to take out the magazine.
Step 2: Step Two
In this step you need to find the lengthly button as shown in the picture. Ok now on the other side you will find a lever above the trigger on the left side as shown in the picture. So while holding down the button push the lever towards the front of the gun. Now just turn the gun on its side and let the piece fall out and same for the other side.
Step 3: The Disassembling
Now just hold the gun like your going to cock it and push forward.
Step 4: Voila
You have just learned how to field strip a gun. To reassemble just do the steps in reverse.
All comments accepted.
Participated in the
The Instructables Book Contest