How to Make 3D Printed Parallel Gripper With RC Servo 9G SG90

Description:
This is the 3D printed parallel gripper. It is light and small, perfect for the small project such as robot arm. The gripper is controlled by Tower Pro Micro RC Servo Motor 9g SG90. The gripper will open when the servo motor move to 90 degree and it will be closed when the servo motor move to 180 degree. The gripper can be attached easily to other hardware by locking the predesign M3 screw hole.

Specification:

Origin: Malaysia
Come with Tower Pro Micro RC Servo Motor 9g SG90
Rotation angle:
- 0 degree (+- 10 degree) --> gripper closed
- 180 degree (+- 10 degree) --> gripper open

*Note: The servo cannot move to degree which less than 180 deg, it may spoil the servo motor.