How to Make Auto Water Planting

Introduction: How to Make Auto Water Planting

Hey guys! Today we will going to show you how to make Auto water planting that is cost friendly. This project operate according to the timer we set. When it reach it preset time, the water will flow out and stop when the water detector sense enough humidity. It will water the plant back when it reach the next set timer.

Step 1: Gather Your Things Up!

All you need in this project is:

1. DC12V 370 WATER PUMP https://www.mybotic.com.my/webshaper/store/viewPr...

2.MB-18 RAIN AND WATER SENSOR KIT https://www.mybotic.com.my/webshaper/store/viewPr...

3. 13A TIMER https://www.mybotic.com.my/webshaper/store/viewPr...

4. DC JACK (FEMALE) https://www.mybotic.com.my/webshaper/store/viewPr...

5. WATER PUMP PIPE 3*5MM https://www.mybotic.com.my/webshaper/store/viewPr...

6. DC 6V 2A ADAPTER https://www.mybotic.com.my/webshaper/store/viewPr...

All other item we use other than above is just recyclable items. You can use anything suitable item for the project.

Follow the circuit diagram that we show in the image to make sure this auto water planting will work like it should in the introduction.

Step 2: Let's Do This!

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • PCB Challenge

      PCB Challenge

    Discussions