How to Make Mini Tesla Coil

Introduction: How to Make Mini Tesla Coil

About: someone who likes electronics Yt channel : IG 1 : sottong_teknik

In this article I will not discuss the Arduino circuit like the previous article.

This time I will show you how to make a mini Tesla coil.

Let's start making it.

Step 1: Required Componets

To make a Tesla coil, the components you need are as follows:

  • PCB 1x
  • DC Socket 1x
  • Switch 1x
  • Capacitor 1uF 1x
  • Resistor 1K 1x
  • Transistor BD243C 1x
  • Heatshink & Screw1x
  • Coils 1x
  • Spacer 3x

Additional Components

Step 2: Assemble All Components

Assemble all components to the PCB. Put components in accordance with the image on the PCB.

Step 3: Result

After all components are installed. Turn on the Tesla Coil using a 12V DC Adapter.

Bring the incandescent light to the coil. If the circuit is working, the incandescent LED will light.

For more details about the results, watch the video above.

Be the First to Share


    • New Year, New Skill Student Design Challenge

      New Year, New Skill Student Design Challenge
    • One Board Contest

      One Board Contest
    • Raspberry Pi Contest

      Raspberry Pi Contest