How to Make the Super Omniwing Paper Airplane

by OrigamiAirEnforcer

28K1415

Intro: How to Make the Super Omniwing Paper Airplane

The Super Omniwing is a fast, stealthy long range flying wing.

This airplane is one of my more advanced designs developed from another person (menamiketrx on Youtube)'s design.

TAA USAF Designation: F3-1V

STEP 1: Materials

Required:
1 sheet of 8.5 by 11 inch paper (A4)
Tape
Scissors
Optional:
Pencil 

STEP 2: Start

First, take your paper and align and fold it "hamburger"-style.

Then fold it into fourths.

STEP 3: The Corners

Fold the corners in.

Then fold them into the center.

Now fold the top down.

Fold into the center again.

STEP 4: Time to Cut

Fold the Super Omniwing in half.

Then cut a triangle 2.25 in. by 2.25 in from the rear of the aircraft. Do NOT throw this away.

After that, cut fins along the wing edges.

STEP 5: Unfold

Unfold the shape so it spans it's entire wingspan.

Now tape the front folds down.

STEP 6: Counterweight Folding

Fold the triangle into itself as pictured then down.

STEP 7: Apply

Tape the triange to the bottom front of the Super Omniwing.

STEP 8: Flight

Now you're ready to fly.

15 Comments

heavyfire88 13 years ago

Lol... It is really EPIC ! NEAT 5PTS. :D

theswordninja561 13 years ago

i must have done this wrong...mine goes straight down, and I've made the the omni-wing delta so i thought this wouldn't be a problem

legoman111 13 years ago

i made a new desing based off this paper airplane

legoman111 13 years ago

uh...now now but i will try to post it as soon as possible.

tonyrider 13 years ago

How do u fly it
and will i tape the front of the extra triangle with the plane

OrigamiAirEnforcer 13 years ago

Well, to fly it you mustn't throw it like a dart. It will not fly correctly or perhaps at all. The Super Omniwing's "flying wing" configuration requires it be pitched down, and pushed forward at a moderate speed. Then release it. Although a different airplane, the OmniDelta's launch procedure is the same (see the picture below). And yes, the triangle that you've cut off the trailing edge of the plane should be folded up as pictured on Step 6 and then applied to the nose as a counterweight. Good luck!  

FrozenIce 13 years ago

 were on earth is a bottom front

OrigamiAirEnforcer 13 years ago

The bottom front would be the bottom of the front of the aircraft. I've put a box around this area to clarify. 

Robert E Rogers 12 years ago

If anyone would love to see my flying wing just let me know it's a monster. i can throw my flying wing 100ft or more in the air

dogpig21345 5 years ago

hey yeah I would like to be able to make it

irabangb 10 years ago

origamiairenforcer- I am trying to make a paper plane that will be able to fly for a long time. a little help?