How to Make a Drill Power Water Pump - Step by Step
Intro: How to Make a Drill Power Water Pump - Step by Step
Make your own Homemade water Pump using drill Machine.
STEP 1: List of Materials
1. White acrylic sheet
2. Metal sheet
3. PVC pipe
4. Ball bearing
5. Bike Tyre tube
6. Nuts and bolt
7. Drill Machine
STEP 2: Cut the Acrylic Sheet
give the shape of centrifugal pump and also cut the round shape for inner propeller.
STEP 3: Attach PVC Pipe to Acrylic Sheet
using hot air gun, mold the PVC pipe and fix it to one part of acrylic sheet
STEP 4: Attach Ball Bearing to Acrylic Sheet
STEP 5: Cut the Metal Sheet
Make the propeller blade using metal sheet, attach six blade to round shape acrylic sheet and attach hole propeller to water pump
STEP 6: Make the Arrangement for Inlet
Make the arrangement for Inlet and joint whole part togther
6 Comments
RolandS46 5 years ago
GlennS10 6 years ago
Good looking pump. How much suction is on the inlet side? If much this could be a easy answer to pump water from a well. Again good job.
Abe Sam 6 years ago
Full marks for creativity! Congratulations!
inconceivable1 6 years ago
huh... cool!
hedgesci 6 years ago
very nice. its good to see a project that doesn't require a 3d printer, cnc , arduino, and so on. thank you for this ble.
DIY Hacks and How Tos 6 years ago
Very cool. And if yo use a cordless drill you can take it anywhere.