Introduction: Hanging Pallet Wood Beer Bottle Opener
In this instructable I'll show you how to make this cool hanging beer bottle opener perfect for the shop or as a gift. This beer bottle opener is made using pallet wood but you an also use a pine board. This same beer bottle opener sells on Etsy for $20. Make one for yourself for less than $2! The metal bottle opener used in this build can be bought on ebay or amazon.
Step 1: Cut Your Pallet Wood
Cut (5) pieces of pallet wood to the following sizes:
(1) piece 5.5" X 16"
(3) pieces 4" x 3"
(1) piece 5.5" x 4"
Step 2: Paint & Sand Pallet Wood
Paint each piece and then lightly sand with 120 grit sand paper.
Step 3: Assemble
1) Using a brad nailer or screws, assemble the wooden pieces.
2) Attach bottle opener to back board. You can purchase the opener from ebay or Amazon for less than $2.
Step 4: Enjoy a Cold One
Hang the bottle opener up and enjoy a drink of your choice!
2 Comments
5 years ago
Nice inexpensive system for keeping the caps!
Somebody has uses for the caps. An amazingly large amount of bottle caps can be collected in a year or two.
These sometimes have a large magnet under the opener to catch the bottle caps. It's a design option some people find useful.
I like just putting the trash can underneath and letting the caps automatically go into the trash.
Who else has ideas for using the bottle caps?
5 years ago
Great project for either kitchen or a back patio. And if it is portable, you can move it wherever you want it.