How to Make a Calvin and Hobbes Snowman

Intro: How to Make a Calvin and Hobbes Snowman

The best snow sculptures were not created in the snow outside, but inside with paper and a pen by Bill Watterson. Some of his best strips were his snowman ones, and so after reading Calvin and Hobbes for so long; I decided to actually make one of the snowmen that Calvin made. You will enjoy making a snowman that was once seen by millions in the paper now in your yard. This is gauranteed to impress the neighborhood.

STEP 1: Materials You Will Need

For this project you really don't need much, and it is easy to substitute items. We substituted some of the common items for things you would find at your workshop or at home.
For the tools we used:
                - woodsaw
                - shovel
                - a pair of hands

The materials include:
               - snow (obviously)
               - carrots (we used orange markers instead)
               - coal (we used electrical tape)
               - pebbles or small rocks
               - twigs

STEP 2: Making the Headless Snowman

First, you want to make the base of the snowman. It should be big, but remember that you will have to put the body on, and the body is almost as big as the base. For now, don't worry about making it look perfect, we will get to that later.

STEP 3: Making the Bowling Snowman

Next, we have to make the snowman who is bowling. To start out, you want to make a base the same or similar size to the beheaded snowman. You want to have it end up in front of the beheaded snowman. Second, you want to make the body, which is a little smaller than the base. When you put it on the base, you want to make sure it is overhanging off the base, so it looks like the snowman is leaning forward. The head of the snowman should be slightly off center of the body. When you finish, the snowman should look like it is leaning forward.

STEP 4: Adding the Arms

The next step is to add the sticks for the arms. This is a crucial step, because if you get it wrong, the joke is ruined. For the beheaded snowman, you want two sticks that make a 90 degree angle. For the bowling snowman, you want to have one straight stick and the other stick should have an obtuse angle.

STEP 5: Making It Look Perfect

Next, you want to make your snowman look nice. Use the saw to shave off clumps of snow that are too big and use your hand to smooth everything out.

STEP 6: Making the Face and Buttons

Now we add the little stuff. Instead of coal, we did the DIY approach and used electrical tape. Take about two feet and wrap it into little flat circles. You will need eight of these. For the face of the bowling snowman, you will need black pebbles and a orange marker (or you can use a carrot). Place the materials as shown in the pictures.

STEP 7: Making the Beheaded Head and Bowling Pins

At the end of the bowling lane, the first step is to make the beheaded head. Make a normal size head and put it down. Take a couple of small twigs and use them as crosses for the eyes. Put an orange marker for the nose between the eyes (but a little below). Then use your hands to scoop out a mouth. The last step is to make ten small bowling pins. These should be about the length of the decapitated head or a little smaller. Place them around the head and have some laying down and some standing up.

STEP 8: Making the Bowling Lane

The final step of this project is to make a bowling lane. We did this by just stepping down hard in the snow in a straight line.

STEP 9: Finishing It Off

You are done! You might need to make a couple of corrections or finishing touches, but it should look pretty good. 

Comments

[Electromagneticradiaton]

I?C&H⛄⛄⛄⛄⛄⛄⛄⛄

o

[buck2217]

I loved Calvin and Hobbes, buty how did one small kid make so many snowmen!!

[CrystalB01]

Imagine what other people will think
"I have to lay back on the egg nog'

[nanio]

Nice sculptures.

[Mechanical Undertow]

i am stupentus MAN!!!!!!!!!!

[splazem]

Uhhh... It's stupendous man, if you are referring to the strip.

[Mechanical Undertow]

oh sorry i waz only 9 at the time i wasent a good speller

[splazem]

Thank you all for you comments. Buteomont, I like your idea of spray paint, I will definitely do it next year. Kelseymh, it would be my dream come true if Mr. Watterson even saw these, but I doubt that will happen. Thank you all for commenting, and make sure to vote please!

[ikoda]

Don't hurt earth, use food colouring or something nature friendly.

[Valster]

Food coloring in spray bottles works great. My grandchildren enjoyed spraying the snow last year. I went to my neighbor's house and sprayed his name in VERY large letters on his lawn. The mailman loved it.

[Grzld]

I did this sorta think last year but it was a snowman on a toilet with a real newspaper i was proud of my accomplishment my parents not so much haha

[Valster]

LOL! That's why you have parents - to roll their eyes! In my case, my kids disown me!

[splazem]

sounds cool.

[kerns]

You might enjoy this - http://www.tor.com/blogs/2011/12/your-daily-moment-of-snowman-carnage-zen?WT.mc_id=0

[dscotthep]

I wish I had a photo of the one I did of the snow man (laying on his back) with the tree coming up through his mid-section. It was a big neighborhood hit!!

[mdavis16]

I think this was one of Calvin's Snowman House of Horror sculptures as well. I really need to try some of this stuff this winter.

[splazem]

i would love to see a picture! It sounds cool.

[zeppomarks]

This is great! I have been doing Calvin inspired snowmen too!

[Plo Koon]

how do u put a pic on a comment??

[Plo Koon]

Dude that is hilarious!!!