Introduction: How to Make a Fishtail Loom Bracelate

Hey everyone! So in this tutorial I am going to be showing you how to make a very easy and cute loom bracelate called fishtail bracelate.So lets get started!

Step 1: What You'll Need

(1) A mini loom

(2) A loom stick

(3) S or C clip

(4) Loom bands ( any color of your choice)

Step 2: Starting the Bracelate

First of all,add a rubber band with a twist like fig 8.Then add two more rubber bands with twist.Now take the down rubber band (shown here white) and put it on the two rubber bands (shown here yellow).Do the same to the other side.

Step 3: Repeat the Same Step

Now add two more ubber bands (shown here white) and take the down two rubber bands(shown here yellow) and put it on the up one.

Now keep repeating the step until the desired length is done.

Step 4: Finishing the Bracelate

When you reach at the end add a rubber band (shown white here) and take the down two rubber bands(shown pin here) and put them on the up one.Take a S or C clip and hook the both sides in the clip.

Connect the other end with the bracelate.

Step 5: Ready!

The fishtail bracelate is ready!

So guys I hope you liked this post and please comment down below and let me know how you liked this post.

If you guys want more loom band posts so I will post more.

So bye!

Step 6: