Introduction: How to Make a Walking Robot With Moving Arms # 1
Hi guys, this is a video based tutorial. This is the first of two walking robots tutorials that I've planned for long time to share with everybody. The general idea of this project is to make something entertaining with cheap and used materials so everybody can do it.
In this tutorial I try demonstrate a method in making a simple walking robot that is easy to assemble and disassemble with ice cream sticks and parts of broken toy car.
Hope you enjoy it.
Step 1: Parts Needed
- A gearbox
- Galvanized wire
- (2) 4 mm terminal blocks
- (6) 3 mm lock nuts
- (4) 3 mm nuts
- (4) long 3 mm machine screw
- (2) short 3 mm machine screw
- 5 ice cream sticks
- Brass tube
Step 2: Tools
- Pliers (especially the one with long mouth)
- Tube cutter or iron saw
- Hot glue gun
- Screwdriver
Step 3: Let's Make It
Click video to watch instructions and demonstrations
7 Comments
4 years ago
Good job!!! Ill made it
Reply 3 years ago
Good Job Very Easy
6 years ago
But if the speed motor of rotation is too fast how is possible to decrease (I'll try with low battery..)' I supose need resistance or little circuit speed regulation, but how? Thanks a lot from Italy.
6 years ago
Which gearbox to be used
6 years ago on Introduction
Sir please give the video in zip folder for downloading, Because video is not responding.
7 years ago on Introduction
Thanks for sharing this 'ible! How long did this take to make?
Reply 7 years ago on Introduction
Thanks to you too. It takes 2-3 hours to make.