How to Make Modded (metal Tip) Nerf Bullets

Introduction: How to Make Modded (metal Tip) Nerf Bullets


Step 1: You Will Need

To make this dart, you will need:
A nerf dart (odviously)
A drawing pin

if you don't already have drawing pins, you can get them from just about anywhere that sells stationary. e.g the range if you're british or walmart if you're american

Step 2: Making the Dart


To make the dart, simply push the drawing pin hard into the top of the dart

Step 3: Finished!


You are now ready to shoot your annoying sister/brother!!! or if your boring, a target.

Note: I am not held responsible if you take someones eye out with this dart.

These bullets are of my design as far as I know. if Someone else has already have made these darts, I did not copy them.

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest
    • Plastic Contest

      Plastic Contest

    9 Discussions

    0
    axxium
    axxium

    8 years ago on Introduction

    "if you don't already have [a nerf gun], you can get them from just about anywhere that sells [AMERICAN products] -. e.g the range if you're british (good for you! [let's suppress the world!) or walmart if your american (uh..[walmart].. [... not 'americans'... bigot ])"

    Overall, thanks for the guide. There is a "be nice" policy at Instructables, so I'd try to refrain from ignorant-ish comments.

    Cheers!

    0
    knexguy92
    knexguy92

    Reply 8 years ago on Introduction

    Sorry about that, I really didn't mean to come off as hating Americans. I have removed the 'ignorant-ish' comments, and I will make sure to refrain from making such comments again.

    0
    modder1
    modder1

    8 years ago on Introduction

    eh america and britain who needs that new zealand has everything!

    0
    h8864
    h8864

    8 years ago on Introduction

    dont be racist. america won 2 wars against britain. is that why you hate us?

    0
    zglynn
    zglynn

    9 years ago on Introduction

    um america rules and it ses on the nerf gun don,t mod the darts

    0
    tsaman
    tsaman

    9 years ago on Introduction

    In the US we usually call drawing pins "thumb tacks" or just "tacks".

    How does this affect the flight of your darts?

    0
    knexguy92
    knexguy92

    Reply 9 years ago on Introduction

    I don't think it affects the flight of your darts too much, but i haven't done any real tests. This is my first instructable and I wasn't expecting to get 2 subscribers and some feedback this soon. This definitely went better than my youtube channel...
    Anyway, thanks for the comment. I've also made a nerf dart with the thumb tack the other way round... I'll post an Instructable on that soon. Anyway this comment is far too long and boring so I'll end it here.