Great concept I would love to learn how to make this! My only problem is this is not technically an Ible due to the fact there is no info on how to duplicate the product. Please update this with a how to section or remove it due to lack of information.
It looks like a pair of machined discs that are riding on the inside edges of the rim and are either set with a roller bearing assembly in the outer edges of the discs, or possibly the bearings are fixed in the rim at either side.
7 Comments
12 years ago on Introduction
I wouldn't want to be on that thing when the bearings sieze.
Reply 7 years ago on Introduction
and being on a regular bike when a bearing siezes is better, how? lol
Reply 10 years ago on Introduction
<p><img src=http://www.thebikergene.com/gallery/albums/Hubless%20Monster/hublesseditsmall.jpg><p>Hubless is the new old cool
12 years ago on Introduction
Great concept I would love to learn how to make this! My only problem is this is not technically an Ible due to the fact there is no info on how to duplicate the product. Please update this with a how to section or remove it due to lack of information.
12 years ago on Introduction
So how do we make it?
13 years ago on Introduction
It looks like a pair of machined discs that are riding on the inside edges of the rim and are either set with a roller bearing assembly in the outer edges of the discs, or possibly the bearings are fixed in the rim at either side.
13 years ago on Introduction
Could use a little information about this.