Industrial Spool Chair

Tools Needed

Reciprocating
Saw

Power Drill

Hammer

Wrench

Orbital Sander

Materials Needed

3x Industrial
Spool

3x 36x1/2’’ Metal Rods

8x 36’’ Planks of wood (24ft in total)

6x Washers

6x ½’’ Metal Nuts

Step 1: Step 1

Remove the spool wheels from the connecting wood

Step 2: Step 2

´Drill 3 ½’’ holes, one at the base of the chair, one at the top, and one at the lower edge.

Cut out 8 more holes, in the formation of a chair seat, for wood later on

Step 3: Step 3

Prepare 836’’ planks of wood

Place the wood into the wood holes and 36’’ metal rods into the metal holes.

Step 4: Step 4

Tighten the wood on and sanding any sharp edges