Make It - Engraved Cutting Board

Introduction: Make It - Engraved Cutting Board

About: https://www.youtube.com/dustinpenner1

Epoxy filled, CNC cut inlay in a maple cutting board. The epoxy used was West Epoxy and it was poured over fully cured black spray paint. Before the black paint was laid down, I sealed the wood with a spray lacquer. The top was was sanded from 80 up to 400 before a mineral oil and beeswax finish was applied.

Be the First to Share

    Recommendations

    • Chocolate Challenge

      Chocolate Challenge
    • Go Big Challenge

      Go Big Challenge
    • Make It Modular: Student Design Challenge

      Make It Modular: Student Design Challenge

    Comments