Jump Pad Made for Floating Islands

Introduction: Jump Pad Made for Floating Islands

I made this to go with Squid_ward's floating island instructable. View it here: https://www.instructables.com/id/Floating-Island/. Now, to the point all you will need is a floating island, a slime block, a sticky piston, and a lever.

Step 1: Make a Floating Island

Make a floating island. https://www.instructables.com/id/Floating-Island/

Step 2: Marking Your Spot

Jump about 1 block of your island.

Step 3: Forming the Bounce Pad.

Place a sticky piston directly below where you landed, place a slime block on top, then add a lever next to the slime block.

Step 4: Testing and Fixing

Test the bounce pad by standing on top of the slime block and flicking the lever. Then, edit the island so you can get on.

Be the First to Share


    • Reclaimed Materials Contest

      Reclaimed Materials Contest
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Unusual Uses Contest

      Unusual Uses Contest