Introduction: K-nex Simple Gun Target
Hi guys this is my 2nd Instructable, and a pretty easy one. It is just a simple target you can shoot at with your K-nex guns. So if your ready, LETS GET STARTED!
Step 1: Piece Count
Here it is, classic piece count. I know everybody loves these, lets get counting.
Rods:
Green/Black small ones-14
White-13
Blue-5
Yellow-3 (2 are optional, 1 is needed.)
Total Rods:35 (Again, 33 are needed optional 2 yellow.)
Connectors:
White Circles-3
Yellow Half-Moon-3
Green-2
Red-5
Grey 1 Connector-2
Orange-2 (Optional with the yellow rods, you dont need them.)
Total Connectors 17 (Only 15 needed.)
Other: Y Connector-2
Rods:
Green/Black small ones-14
White-13
Blue-5
Yellow-3 (2 are optional, 1 is needed.)
Total Rods:35 (Again, 33 are needed optional 2 yellow.)
Connectors:
White Circles-3
Yellow Half-Moon-3
Green-2
Red-5
Grey 1 Connector-2
Orange-2 (Optional with the yellow rods, you dont need them.)
Total Connectors 17 (Only 15 needed.)
Other: Y Connector-2
Step 2: Step 1
You are done.Here is the main step, there is an optional step after this. Remember to read the boxes.
Step 3: Optional Step
This step is optional.