KAR V2

by jmm72

1.1K043

Intro: KAR V2

LOOK AT MY KARV3
This is the new and improved version of my assualt riffle. It has a black dot sight and is powerful and gets decent range.

44 Comments

DracoUltima 13 years ago

Try a tight barrel, instead of the loose one that you have, to prevent the ram from flopping around, I find that loose barrels are much more suitable if they have a pin guide. Anyways, nice job. 5*

jmm72 13 years ago

first look at my KARV3. Second it doesn't flop around because there are metallic blue pieces that center the ram.

DracoUltima 13 years ago

Don't be so negative.....you've been known to post harsh comments for no reason. Try lightening up a bit, it might help.

jmm72 13 years ago

dude look at the third version

jmm72 13 years ago

did u c my v3

jmm72 13 years ago

ok i know in the pic its slanted but thats only because i had the rubber bands in the wrong position. i dont really need a pin guide. if this becomes a major issue i might put one on

Millawi Legend 13 years ago

Lol i didnt actually see that picture. you will be able to put a lot more bands on if you have a decent pin guide.

jmm72 13 years ago

thats nice to know

~Aeronous~ 13 years ago

Much better.... fix up the handle, and the back of the pin.

jmm72 13 years ago

i know the handle can be a bit of an issue but the back of the firing pin? what do you mean?

~Aeronous~ 13 years ago

Just put a ball joint socket on it, then wrap it in tape. what you have there is incredibly chunky, it will decrease range by a tonne.

jmm72 13 years ago

i tried that and it didnt help

jmm72 13 years ago

if i do that it will decrease the amount the ram goes down the barrel and that does decrease the range
More Comments