Introduction: K'NEX Hand Crank Conveyor Belt With a Lock
I am Brody, and I just started using Instructables.
Look at the pictures to see the finished product.
Look at the pictures to see the finished product.
Supplies
One small KNEX set
Step 1: Parts
RODS: 55
Grey : 1
Red : 7
Yellow : 12
Blue : 34
Green : 1
CONNECTERS: 61
Purple/Dark Grey : 14
Tan : 3
Orange : 2
Red : 36
Yellow : 6
OTHER: 65
Grey spacer : 13
Blue spacer : 24
Chain Link : 26
End-of-rod-stop : 1
Medium sized gear : 4
Grey : 1
Red : 7
Yellow : 12
Blue : 34
Green : 1
CONNECTERS: 61
Purple/Dark Grey : 14
Tan : 3
Orange : 2
Red : 36
Yellow : 6
OTHER: 65
Grey spacer : 13
Blue spacer : 24
Chain Link : 26
End-of-rod-stop : 1
Medium sized gear : 4
Step 2: Frame
We are going to make the "skeleton" of the build.
Step 3: Gears
Now we are going to make the combination of gears.
Step 4: The Belt
For the belt, you'll need twenty-six of each of these things:
blue rod
red connector
chain link
blue rod
red connector
chain link
Step 5: Crank
The crank has 12 spacers!
Step 6: Putting It All Together
Step 7: How to Lock
Slide the blue rods toward the crank, and it is locked. Slide them back, and it's unlocked.