K'Nex Automatic Pokemon Training Machine
Intro: K'Nex Automatic Pokemon Training Machine
STEP 1: Part List
This is a list of... parts used in the machine.
STEP 2: The Containment
1-Make
2-Make
3-Combine (left part is step 2)
2-Make
3-Combine (left part is step 2)
STEP 3: The Axel
1-Make
2-Make
3-Make
4-Combine 2 and 3
5-combine 1 and 4
6-Add what you just made to the Containment.
2-Make
3-Make
4-Combine 2 and 3
5-combine 1 and 4
6-Add what you just made to the Containment.
STEP 4: Other Stuff
1-Make
2-Attach to main body
3-see those empty spaces?
4-add blue rods there
5-make
6-twist so it looks like that
7-attach right under the hinge
8-Make
9-attach
10-connect with a blue rod
11-make
12-connect to the hinge and thru the snowflake
2-Attach to main body
3-see those empty spaces?
4-add blue rods there
5-make
6-twist so it looks like that
7-attach right under the hinge
8-Make
9-attach
10-connect with a blue rod
11-make
12-connect to the hinge and thru the snowflake
STEP 5: How to Use
1-what you should have now
2-put your DS/DSi under it
3-Line it up with the up button
4-With DS/DSi under it
5-remove the yellow rod there for easy access to the switch
OK..HOW TO USE!
1-place the Pokemon you want to train in the daycare
2-go to a place in cycling road where you cant move down.(path blocked by bridge, biker, etc.)
3-turn motor on
4-get on with your life
LOL JK if u play pokemon u have no life
5-come back and you will have an uber-leveled Pokemon!
2-put your DS/DSi under it
3-Line it up with the up button
4-With DS/DSi under it
5-remove the yellow rod there for easy access to the switch
OK..HOW TO USE!
1-place the Pokemon you want to train in the daycare
2-go to a place in cycling road where you cant move down.(path blocked by bridge, biker, etc.)
3-turn motor on
4-get on with your life
LOL JK if u play pokemon u have no life
5-come back and you will have an uber-leveled Pokemon!
STEP 6: Troubleshooting
1-it does not press the button hard enough!-fix-put a hardcover book on top of the machine
2-the axel wont move!-make sure you built it right, and if you did, replace the batteries
2-the axel wont move!-make sure you built it right, and if you did, replace the batteries
STEP 7: You're Done!
You're done! Again, much credit goes to I_am_Canadian.
36 Comments
Robo Redneck 11 years ago
bboy321321 11 years ago
DJ Radio 14 years ago
AJBrawlLvr 14 years ago
Vynash 14 years ago
Aint that sweet?
Vynash 14 years ago
AJBrawlLvr 14 years ago
Vynash 14 years ago
smilee 14 years ago
Vynash 14 years ago
smilee 14 years ago
Vynash 14 years ago
bnapier96 14 years ago
Vynash 14 years ago
smilee 14 years ago
AJBrawlLvr 14 years ago
Vynash 14 years ago
knex_mepalm 14 years ago
AJBrawlLvr 14 years ago
Vynash 14 years ago