Knex BallBuster Ball Machine Instructions
Intro: Knex BallBuster Ball Machine Instructions
This is my final ball machine for the rest of the year since I have to go back to college. I wanted to end my ball machine spree with something huge and this is what came out, a 6' 10" high tower with five paths and a new element made by me. That element is on path one. This project took a lot of my knex to the point where I ran out of green rids!, I had to start using the black ones. Anyway, I hope you enjoy building this beast. This ball machine has the most pieces out of all of my ible's, 8,600!
STEP 1: Piece Count
RODS:
grey: 17
red:279
yellow: 765
blue: 1416
white: 577
green: 1320
CONNECTORS:
white: 203
blue 3d: 286
purple 3d: 723
yellow: 692
green: 68
red: 495
orange:263
light-grey: 13
dark-grey:334
SPECIAL:
gold track connector: 326
gold track rod(length of red rod): 14
silver spacer: 227
blue spacer: 179
tan-clip: 28
blue-clip: 17
Y-clip: 87
ball-socketĀ connector: 2
black rod: 5
tan rod: 2
purple flexi rod: 26
orange flexi rod: 14
chain links: 170
track spice: 9
red gear: 15
yellow gear:1
Large yellow gear: 1
blue gear: 5
large tire: 1
medium tire: 2
medium tire no tread: 5
medium tire tread: 2
small tire: 7
large new tire: 3
motor: 1
Balls: 5-10
GRAND TOTAL: 8600
grey: 17
red:279
yellow: 765
blue: 1416
white: 577
green: 1320
CONNECTORS:
white: 203
blue 3d: 286
purple 3d: 723
yellow: 692
green: 68
red: 495
orange:263
light-grey: 13
dark-grey:334
SPECIAL:
gold track connector: 326
gold track rod(length of red rod): 14
silver spacer: 227
blue spacer: 179
tan-clip: 28
blue-clip: 17
Y-clip: 87
ball-socketĀ connector: 2
black rod: 5
tan rod: 2
purple flexi rod: 26
orange flexi rod: 14
chain links: 170
track spice: 9
red gear: 15
yellow gear:1
Large yellow gear: 1
blue gear: 5
large tire: 1
medium tire: 2
medium tire no tread: 5
medium tire tread: 2
small tire: 7
large new tire: 3
motor: 1
Balls: 5-10
GRAND TOTAL: 8600
STEP 2: The Base
Where all ball machines start from.
STEP 3: White Floor, Return Track, Lift Wheel and Motor
Why do I like wheel lifts? I have no idea!
STEP 4: Main Support and Lift
The tallest section on the machine.
STEP 5: Other Supports
They're important aren't they?
STEP 6: Path Selectors
There are four of them to make five paths.
STEP 7: Path 1
This path contains my new hopper car element. This also uses Sandroknexmaster's leap-frog element. This step also has exactly 100 pictures!
STEP 8: Path 2
I like to call this path " the fast track to success" since it is a roller coaster path.
STEP 9: Path 3
A very erratic path.
STEP 10: Path 4
A nice slow path around the front support tower followed by thirteen ball alternators.
STEP 11: Path 5
This path was hard to design in terms of space. I had to make it hop over a section of path 4 and weave around path three and two.
STEP 12: Modifications
These are some mods I made while I was recording the machine.
42 Comments
knex akbar 9 years ago
I ran out of all my yellow rods, blue rods green rods and yellow connectors on the last step... Grrrr
knexnutter 3 years ago
knexnutter 3 years ago
Dburke222 4 years ago
RyanN60 6 years ago
wanna see a pic of it now I moved and it didnt really survive lol since I made it in my basement. It's missing huge chunks cause I have also been taking parts from it for echo.
Haze013 7 years ago
starting on this project today!
kkemp2009 9 years ago
Hi, I'm having a go at building this but having a few issues with the new cart element. Can't seem to get the weight right to make the cart move either up when empty or down when it has balls in it.
Any suggestions?
knexpert#10829476 8 years ago
WD40 always works. Grease the track with it:D
martijnb95 9 years ago
step 3 pic 14: i see what you did there :P
very nice machine though.
KnexExtreme90 9 years ago
www139 10 years ago
My only comment is that maybe you should record the lift(s) at the beginning of
the video. You could look at my ball machine video.
Just click on my profile and look for "automated a k'nex
ball machine".
Otherwise, very good!
I love the white mat/floor/whateveryoucallit
:D
knexpert#10829476 10 years ago
www139 9 years ago
Your welcome! (late reply... sorry!)
knexpert#10829476 10 years ago
www139 10 years ago
<:D
JoshuaCope01 9 years ago
hi im josh! im 11 and I nearly finished this! I (my dad) orded some knex and it got lost in the mail so I never finished this project! I just want to let you know if you are 11 or over you can with ease start this project! I also had some problems with the new cart element but I fixed it, anyway great intractable and keep up the good work!
TheUnfortunateHobbit 9 years ago
Look at the fourteenth picture in step 3
TheUnfortunateHobbit 10 years ago
knexpert#10829476 10 years ago
TheUnfortunateHobbit 10 years ago