Introduction: Knex Bow - Shoots 20 - 30 Feet
This is my first instructable :P Hopes you like it
..:: How-To Fire ::..
Insert Grey Bar Into The Two White Connectors And Pull Back Then Let Go.
..:: How-To Fire ::..
Insert Grey Bar Into The Two White Connectors And Pull Back Then Let Go.
Step 1: Make 2 of These..
Pieces Used:
6 Yellow Connectors
8 White Bars
2 White Connectors
8 Green Connectors
6 Blue Spacers
6 Yellow Connectors
8 White Bars
2 White Connectors
8 Green Connectors
6 Blue Spacers
Step 2: Connect Both Pieces
Pieces Used:
Parts made in step 1
2 Red Bars
Parts made in step 1
2 Red Bars
Step 3: Make This..
Pieces Used:
2 Yellow Bars
6 White Connectors
6 White Bars
2 Red Connectors
2 Grey Connectors (The one with one connection)
2 Green Bars
2 Yellow Bars
6 White Connectors
6 White Bars
2 Red Connectors
2 Grey Connectors (The one with one connection)
2 Green Bars
Step 4: Connect Two Pieces..
Pieces Used:
The part from step 1
The part from step 3
The part from step 1
The part from step 3
Step 5: Get These Pieces..
Pieces Used:
2 White Bars
2 Small Wheels
1 Thick Elastic Band (Thicker = Stronger = Further Range = Hits Harder)
2 White Bars
2 Small Wheels
1 Thick Elastic Band (Thicker = Stronger = Further Range = Hits Harder)
Step 6: Connect Pieces
Pieces Used:
Parts from step 5
Parts from step 4
Parts from step 5
Parts from step 4