Introduction: Knex Card Shoe
More by the author:
About: I make K'nex guns, specializing in semi-automatic, RBG-Slingshot hybrid systems which i use in most of my guns.
Note: I am not responsible in any way for any damage, injury, or death caused by my Instructable…
It's a K'nex I'ble by Masterdude, and it's not a K'nex gun or weapon. Not much to it really, just makes a card game a bit more organized with K'nex.
More Instructables by Me.
More Instructables by Me.
Step 1: Making Components of Card Holder
Image 1: Make 9 of these.
Image 2: Make 2.
Image 2: Make 2.
Step 2: Making the Card Holder
Follow the images:
Image 1: Add yellow rods.
Image 2: Add the other parts and 9 gray connectors.
Image 3: Cover with the last part.
Image 1: Add yellow rods.
Image 2: Add the other parts and 9 gray connectors.
Image 3: Cover with the last part.
Step 3: Card Pusher
Follow the images:
Image 1: Make 5 of these.
Image 2: Attach 6 gray connectors to a yellow rod.
Images 3-4: Attach the parts from the first image to the rod as shown.
Image 1: Make 5 of these.
Image 2: Attach 6 gray connectors to a yellow rod.
Images 3-4: Attach the parts from the first image to the rod as shown.
Step 4: Use
Put the pusher in the card holder and place rubberbands as shown. Then pull the pusher back and insert the cards as shown.