Introduction: K'nex Dune Buggy
A fast looking dune buggy with awesome flames coming out above the back wheels and with a "K'nex" motor is moderately fast.
Step 1: Parts List
You will need:
Rods:
6 Red
2 Yellow
2 White
2 Green
1Blue
Connectors:
13 Purple/Gray
4 Orange
4 Yellow
4 Wheel Holders
2 Green
Spacers:
4 Blue Spacers
Motors:
1 Normal Motor
Wheels With Treads:
2 Big
2Small
Rods:
6 Red
2 Yellow
2 White
2 Green
1Blue
Connectors:
13 Purple/Gray
4 Orange
4 Yellow
4 Wheel Holders
2 Green
Spacers:
4 Blue Spacers
Motors:
1 Normal Motor
Wheels With Treads:
2 Big
2Small
Step 2: Base
In the first pic it's showing you where the spacers and wheel holders are placed. In the second it's showing you to push them to the side.
Step 3: Roof
Follow the picture.
P.S. At the back two orange connectors on each side connected by a green rod.
P.S. At the back two orange connectors on each side connected by a green rod.
Step 4: Motor
This is how the motor should look before you attach to the roof.
Step 5: Roof Motor Setup
Connect the motor to the roof as in the pic.
Step 6: Finished
YOU ARE DONE! NOW REV IT UP AND TRY IT OUT!