Introduction: Knex Folding Target Range
I have been meaning to do this ible for a while now, and have only just finally got round to it... I present to you instructions for my folding target range!
I like this one compared to other models because it's relatively low piece and has two handles (one on either side) to reset the targets with ease! When a target is knocked down a red con is shown. There are two different target sizes for different accuracy/power.
Have fun building and don't forget to rate comment and follow me for more awesome stuff!!!
Step 1: Piece Count!
All the pieces:
-purple 3D x29
-blue 3D x7
-Grey (double port) x10
-Grey (single port) x10
-tan clip x2
-blue spacer x16
-grey spacer x4
Step 2: The Base
This is what everything connects to and also what makes the whole thing stand up! I know it's pretty easy but I made it step by step for those who are new to Knex... =D
Step 3: The Reset Frame
This is what you pull to reset the targets and is connected to the base!!!
Step 4: The Targets
These are what you hit with ammo to make them fall down...WOAH...
Step 5: Putting It All Together
the name says it all really...Have fun with your new target range!!!
THANKS FOR BUILDING!!!
1 Person Made This Project!
- SirDaftBunny made it!